The following points should be noted when selecting anti-static raised floor in the construction of computer room:

   1、First, the total area (or number of pieces) of the anti-static floor required for the construction of the computer room and the number of various accessories (standard ratio 1:, 1:) should be accurately determined, and a margin should be reserved to avoid waste or shortage. 

   2、Fully understand the variety and quality of anti-static flooring produced by manufacturers, as well as various technical performance indicators. The technical performance of anti-static floor mainly refers to its mechanical performance and electrical performance. The mechanical performance mainly considers its bearing capacity and wear resistance. The whole anti-static floor shall be installed on the overlapping truss beam. After leveling the anti-static floor, its bearing capacity shall reach a uniform load of more than 1000 kg/m2, and the concentrated load on any part of the anti-static floor shall be more than 300 kg. When bearing a load of 300 kg on a loading point with a diameter of 6 cm, the deflection shall be less than 2 mm without permanent deformation. The adjustable support shall be able to withstand a vertical load of more than 1000kg, and the plate surface shall have certain abrasion resistance. Electrical properties mainly include system resistance, static voltage and surface resistance. The system resistance shall be 105 Ω - 108 Ω. When the temperature is 21 ± ℃ and the relative humidity is 30%, the static voltage of the anti-static floor shall be lower than 2500V, and the surface resistance shall be 105 Ω - 108 Ω.  

   3、The load of anti-static floor shall be determined based on the weight of the heaviest equipment among all equipment in the machine room, so as to prevent permanent deformation or damage of floor caused by overweight of some equipment. 

   4、The anti-static floor has little change due to the influence of external environmental conditions, that is, it will not significantly expand due to the high or low external environmental temperature, that is, when the machine room temperature is slightly high, the anti-static floor will expand and cannot be removed or replaced; When the temperature is low, the anti-static floor shrinks, resulting in a sense of looseness. The shrinkage of the anti-static floor affected by the environment shall be less than, and the deflection of the board surface shall be less than.  

   5、The anti-static floor surface shall be non reflective, non slip, corrosion resistant, non dusting, non vacuuming and easy to clean.

Jiangsu Zhongtian Anti static Floor Main: Jiangsu OA network floor, Jiangsu PVC anti-static raised floor, Jiangsu anti-static floor, Jiangsu all steel ventilation and anti-static floor, machine room office building floor, all steel anti-static floor, all steel anti-static network floor, aluminum alloy anti-static ventilation floor. Welcome to contact us by calling 13951819913 for advice.